Закрыть ... [X]

, how to reset iPad password if forgotten, If you forgot the passcode for your iPhone, iPad, or iPod touch, or your device is disabled. Follow these steps if you’ve forgotten your passcode, or if a message says that your device is disabled. If you forget your iPad’s passcode, you won’t be able to access your files and you will need to reset the device by putting it in recovery mode. Recovery Mode is also useful if you want to erase the iPad’s settings or troubleshoot a problem with the device. If you’ve never synced with iTunes or set up Find My iPhone in iCloud, you’ll need to use recovery mode to restore your device. This will erase the device and its passcode.

Pick a method to erase – 

Unless you made a backup before you forgot your passcode, there isn’t a way to save your device’s data. You’ll need to erase your device, which deletes all of your data and settings:

  • If you’ve synced with iTunes, .
  • If you’re signed in to iCloud and Find My iPhone is enabled, .
  • If you don’t use iCloud and you can’t sync or connect with iTunes, .

 

, how to reset iPad password if forgotten, iPad factory reset without password

Restore using iTunes - iPad factory reset without password

Use this method only if you have previously sync your iOS device with iTunes. If you haven’t then this is not the right way for you  and you have to use iCloud or Find my iPhone feature to reset your iOS device. So make sure that this is the right step for you before proceeding further.

If you’ve synced your device with iTunes, you can restore your device.

  1. Connect your device to the computer you synced with.
  2. Open iTunes. If asked for a passcode, try another computer you’ve synced with, or use .
  3. Wait for iTunes to sync your device and make a backup.
  4. Once the sync and backup have finished,click .
  5. After the sync is complete, restore your device. Syncing and backing up your iOS device will allow you to reset your device without having to worry about data loss. You can do this without unlocking if you’ve synced to this computer before.
  6. When you reach the  while restoring your iOS device, tap .
  7. Wait for the backup to load and you are done.
  8. Select your device in iTunes. Look at the date and size of each backup and pick the most relevant one.
  9. Resetting your device using iTunes backup  will clear your passcode, allowing you to unlock your device. If you want to secure your device again, set a new passcode.

Erase using Find my iPhone – iPad factory reset without password

, how to reset iPad password if forgotten, iPad factory reset without password how to reset ipad without password

This feature only works if  you enabled Find my feature on your . this feature helps you to erase and reset or unlock your  forgotten password by deleting all data and settings. So, use this one if you don’t have your computer with you or you haven’t synchronized your iOS device data to iCloud. How to Reset and iPad forgot password without using iTunes. Also see:

If you , you can use iCloud to erase and restore it.

  1. From another device, go to .
  2. If prompted, sign in with your Apple ID.
  3. Click All Devices at the top of your browser window.
  4. Select the device you want to erase.
  5. Click Erase [device] to erase your device and its passcode.
  6. Now you can either  or .

If your device isn’t connected to a Wi-Fi or cellular network, you can’t erase it with Find My iPhone. how to reset ipad without password

 

Restore using recovery mode – iPad factory reset without password

, how to reset iPad password if forgotten, iPad factory reset without password

Restore using recovery mode - iPad factory reset without passwordRestore using recovery mode – iPad factory reset without password

If you’ve never synced with iTunes or set up Find My iPhone in iCloud, you’ll need to use recovery mode to restore your device. This will erase the device and its passcode.

By using iOS   erase the device and its passcode to unlock iPhone, iPad and iPod Touch.

Connect your iOS device to your computer and open iTunes. If you don’t have a computer, borrow one from a friend, or go to an Apple Retail Store or Apple Authorized Service Provider.

  1. Firstly, Turn off or switch off your iOS device.
  2. Swipe it until it turns off.
  3. In the third step Connect your apple usb cable to your Desktop Pc but don’t connect your device yet.
  4. Start or open iTunes on your Computer.
  5. Keep Pressing and hold your iOS device Home button and plug the iOS device into your computer.
  6. Connecting the device will cause it to turn on, but continue to hold the Home button.
  7. If your iOS device doesn’t turn on automatically, turn it on, but continue to hold the home button.
  8. After Continue holding the Home button a message will appear in iTunes telling you that a device in Recovery Mode has been detected.
  9. Restore your iOS device By using iOS .

, how to reset iPad password if forgotten, iPad factory reset without password

How to factory reset your iPhone or iPadiPad factory reset

  1. Go to Settings > General > Reset > Erase all Content and Settings.
  2. An Erase iPhone/iPad warning box will now pop up.
  3. Click Erase and enter the device’s passcode and Apple ID info when prompted.
  4. The device will then reset and, when completed, you’ll be presented with an iPhone/iPad as if it were straight out of the box.

Hard Reset iPad: How to Wipe an iPad to Factory Settings Without a Passcode: iPad factory reset

  1. Hold down the “Sleep/Wake” button for several seconds until a red slider appears.
  2. Move your finger across the slider to turn the iPad off. Connect the iPadto the computer while holding down the “Home” button to turn on the iPad. Release the “Home” button when you see a message that says, “Connect to iTunes.”

How do you reset an IPAD to factory settings? iPad factory reset

It is just as simple to restore your iPad Mini without iTunes. Go to Settings > General > Reset and tap on Erase All Content and Settings. You’ll then be asked if you want to continue; after the confirmation, your iPad Mini will reset and the Apple logo together with a loading bar will appear on screen.

Erase an IPAD? Factory reset iPad 

To erase your iPhone, iPad, or iPod touch, tap Settings > General > Reset > Erase All Content and Settings. To erase your Apple Watch, tap Settings > General > Reset > Erase All Content and Settings.

Fix iPad is Diabled Using iTunes or Using Recovery Mode

If your iPhone or ipad is disabled after entering the wrong passcode and you can not use your iPhone or iPad, and if it’s saying cannot connect to iTunes, then follow the below steps to Unlock Disabled iPad or iPhone 6 and Reset your iPad or iPhone 6 to Factory settings, Just follow the instructions to Unlock your Disabled iPad and Factory reset iPad or iPhone 6:

Try to back up the iOS device in iTunes:
The first thing you should try to unlock your disabled device is a simple . Connect your iOS device to your computer via USB and open iTunes. Select the device in the upper right-hand corner to display its properties in the main screen.

Click on the “Back Up Now” button to start a sync. You may be prompted to type in your password on your iOS device to start the sync because the device is locked. Once you have typed in your password, you can cancel the back up and start using your device.

Restore the device using iTunes and a previous backup

If the backup trick doesn’t work, then you may have to reset the passcode by . This only works if you have previously synced your device with iTunes and have a backup stored on your computer. Follow these steps to restore your device and reinstall your backup.

  1. Connect the device to the computer with which you normally sync and open iTunes.
  2. If the device is still disabled, or if iTunes does not automatically sync your device, sync the device with iTunes by pressing the “Back Up Now” button.
  3. When the backup and sync are complete, restore your device.
  4. When iOS Setup Assistant asks to set up your device, choose “Restore from iTunes backup.”
  5. Select your device in iTunes and choose the most recent backup of your device.
  6. Wait patiently while the restore completes its process.

When the restore is completed, you should have all your documents, photos, emails and settings in place and the device should no longer be disabled.

Restore the device using recovery mode and reset the password

If you’ve never connected your iOS device to your computer, then you may need to place the device in recovery mode and restore it to erase the device. Unless you have an iCloud backup, you will lose all of your data using this method. If you , you can  during the setup process after the restore.

  1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer’s USB port.
  2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
  3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
  4. Continue holding the Home button until you see the Connect to iTunes screen.
  5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
  6. Follow the prompts in Setup Assistant and proceed to “Set up your device.”
  7. If you used iCloud for backup, tap Restore from a Backup, then sign in to iCloud.
  8. Proceed to “Choose backup,” then choose from a list of available backups in iCloud.

How to reset iPad or iPhone: How to fix a frozen iPhone or iPad

If your iPad or iPhone is frozen and is not working then follow the below steps to know how to Reset iPhone 6, iPhone 7, iPhone 5S, or iPad and fix iPad or iPhone is frozen and not working. Fix iPhone, iPad, or iPod touch won‘t turn on:

If iPad or iPhone screen is black or frozen

Then, you should always try to force your iPhone 6, iPhone 7, iPhone 5S, or iPad to restart.

  • It will not erase iPad or iPhone data.

To force restart an iPhone 7 or iPhone 7 Plus: Press and hold both the Sleep/Wake and Volume Down buttons for at least ten seconds, until you see the Apple logo.

To force restart an iPhone 6s and earlier, iPad, or iPod touch: Press and hold both the Sleep/Wake and Home buttons for at least ten seconds, until you see the Apple logo.

If iPhone or iPad still won’t turn on or start up

You must Plug in iPhone 6, iPhone 7, iPhone 5S, or iPad and charge  up to one hour.  You will see a  charging after sometime. If you don’t see the charging screen within an hour, then you should change the charger or USB cable and try with another one. Make sure it is free from dirt and water and check if every thing is plugged in properly.

If your iPad or iPhone Stuck on Apple Logo

You might see the Apple logo or a red or blue screen for a long time during startup. Try these steps:

  1. Connect your iPhone 6, iPhone 7, iPhone 5S, or iPad to iTunes.
  2. Now you have to force  restart your iOS device.
    • iPhone 7 or iPhone 7 Plus Users: Press and hold the Sleep/Wake and Volume Down buttons at the same time.
    • iPhone 6s and earlier, iPad, or iPod touch Users: Press and hold the Sleep/Wake and Home buttons at the same time.
  3. Don’t release when you see the Apple logo.
  4. You have to Keep holding until you see the recovery mode screen.
  5. Now choose Update option.
  6. Now iTunes will try to reinstall iOS without erasing your data.
  7. iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit recovery mode and you’ll need to repeat steps 2 and 3.

 

Read next:  | 

How to reset iPad or iPhone: What to do if your iPhone has crashed

If your iPad or iPhone is Unresponsive or your iPad or iPhone screen is not working or your iPad or iPhone is not turning on. Then, follow the below steps to reset an Unresponsive iPad or iPhone. This is also called as Hard Reset iPad or iPhone.

To restart your iPhone or iPad hold down the  and the  at the same time until Apple logo appear on the screen. Just release the buttons and you are done, iPhone or iPad may reboot several time, just wait for it.

Read next:

How to reset iPad or iPhone: How to force-restart iPhone 7 or iPhone 7 Plus

Hard Reset iPhone 7 or iPhone 7 Plus: After holding these two buttons for a short while, your iPhone will turn off its display and you will soon see the Apple logo appear. Take a look at the video below to see how it’s done:

How to reset iPad or iPhone: How to back up an iPhone or iPad before you wipe it

 

You can use either iCloud or iTunes to backup your iOS device.

iCloud automatically backs up your iOS device information daily over Wi-Fi when your device is turned on, locked, and connected to a power source.

Back up automatically Using iCloud

  • Go to Settings > iCloud > Backup, then turn on iCloud Backup.

Back up manually Using iCloud

  • Go to Settings > iCloud > Backup, then tap Back Up Now.

Back up iPad or iPhone Using iTunes

Open iTunes > Connect iPad or iPhone > Trust This Computer if it asks you >  iOS device in iTunes > Just click Back Up Now >  You can see your backup in iTunes Preferences > Devices

Read next:

How to factory reset iPad or iPhone: How to factory reset your iPhone or iPad

A factory reset can help resolve issues with your iPhone or iPad if it’s crashing or freezing, but it is also what you’ll want to do if you need to wipe your iPhone or iPad before selling it, or passing it on to a family member or friend.

Luckily it’s very easy to completely wipe an iPad or iPhone. Simply follow the steps in this tutorial and your data security will be assured.

Read next: | .

To reset your iPhone or iPad go to Settings > General > Reset and then select Erase All Content and Settings.

Confirm with the option to Erase iPhone (or iPad) . Tap this. You might have to enter your Apple ID password to confirm it,  your iPad or iPhone will wipe or erase everything.

You can also fully reset your iPhone or iPad through iTunes. When you plug in your iOS device, you should be able to see a ‘Restore iPhone’ button, which will fully reset the device.

Your iPhone or iPad is now ready to sell. For more, read

Recommended:  | |

How to factory reset iPad or iPhone: Deleting apps and other items individually

Go to Settings > General > Usage. iOS will tell you firstly how much space you’re using and how much is available, and will then list the apps taking up the most space.

To delete an app you’re finished with, click it in this list, then Delete App and confirm. Alternatively, from the Home screen you can tap and hold any icon, then tap the X at the top left of an app to delete the app.

Read next:  | ases

How to factory reset iPad or iPhone: Restore an iPhone or iPad via iCloud backup

With the factory reset completed you’ll need to go through the setup of your iPhone again from the beginning; entering your details, WiFi password and a few other things until you reach the page where you’re asked how you want to ‘Set Up iPhone’. You have the three options – Set Up as a New iPhone, Restore from iCloud Backup or Restore from iTunes backup – so select the iCloud option and you’ll be prompted to enter your iCloud account details. Once you’ve done this, and agreed to the terms and conditions, your iPhone will begin restoring all of your data.

When the backup is completed your iPhone will reboot, and then it will start the larger job of downloading all of your apps.

Read next:

How to reset iPad or iPhone: Restore an iPhone or iPad via iTunes backup

 

As with the iCloud instructions we’ve already outlined, follow the steps up to the ‘Set Up iPhone’ screen, then select Restore from iTunes. You’ll be prompted to Connect to iTunes, so plug in your iPhone and you’ll see a screen on iTunes that gives you the option to restore a backup. Click continue and your iPhone will be set up automatically, with the apps being restored from the iTunes backup. When it’s finished, you’ll have a freshly cleaned system and hopefully any problems that you were encountering before will be a thing of the past.

How to reset iPad or iPhone: What to do if your iPhone or iPad isn’t backed up

If you’re worried that your iPhone or iPad wasn’t backed up, chances are that there is a backup that you were unaware of. To find out if you are backing up to iCloud go to Settings > iCloud and tap on Storage. Wait a few seconds for Manage Storage to show up and tap on that. Here you will see your various backups for your iOS devices

To check when your iPhone last backed up, go to Settings > iCloud > Backup and look at the date and time of the last back up. It will have happened the last time you plugged your iPhone in to charge and had WiFi access available. It happens automatically.

How to restore or reset an iPhone 7 | How to Erase iPhone 7

Do you need to restore an iPhone, iPad or iPod Touch and you are not very clear how to do it? In this guide we explain, step by step, the different ways to do it, whether using iTunes or directly from the iOS device itself. The restore will return the operating system of the device to its factory state , that is, it will completely eliminate all of our configurations, apps and data.

Restoring an iPhone, iPad or iPod Touch is the ideal way to get rid of certain problems that may arise after a period of use of iDevice. The most common problems appear after upgrading the operating system (especially with changes from one version of iOS to another, for example from iOS 8 to iOS 9 ) or with the passage of time and the accumulation of “garbage” or debris in the Device.

Restoring or resetting the operating system will not solve a hardware failure, but it can help us detect a failure of this type . If, for example, we have problems with the camera or the microphone of our device and after restoring the problem continues the most likely is the failure is hardware. That is why Apple always asks us to perform a complete restoration before sending a device for repair, because in case of a software failure the restoration would solve it in most cases.

Pre-restoration considerations

As we said at the beginning of the article, restoring an iPhone, iPad, iPad Mini, iPad Air or iPod Touch eliminates completely all the data, apps and settings stored on the device . That is, a restore of an iOS device is the equivalent of formatting and reinstalling the operating system on a computer.

As you will be imagining, our first recommendation is that before restoring a device we must make a complete backup of it. Thus, we will always be able to recover the data and settings that we had before performing the “formatting”.

Usually the restoration is completed successfully with these steps, although if there are any problems, in some cases it may be necessary to follow this guide to put the device in DFU or restoration mode .

Here ‘s how to restore an iDevice , both from iTunes and from the device itself.

How to restore an iPhone 7, iPad, or iPod Touch from iTunes

Our recommendation is that, whenever possible, this mode is used to restore a device. With it we get a complete installation from scratch . ITunes is responsible for downloading the version of the operating system that we have installed from Apple’s servers and installs it from scratch.

To restore an iOS device through iTunes, follow these steps:

  1. We disable Search my iPhone in case we had it activated. To do this we must go to SettingsiCloudSearch my iPhone and deactivate the option. When turning off the switch the device will ask for the key of our Apple ID, we must enter it to deactivate the option completely, otherwise it will not allow us to go ahead.
  2.  We connect the iPhone, iPad or iPod Touch with the USB cable to a computer.
  3. We open iTunes.
  4. Access the tab of the device in iTunes.
  5. Click on the Restore button . Depending on the connected device, the text Restore iPhone , Restore iPad,  or Restore iPod Touch will appear .

After performing these five simple steps the restoration will begin. iTunes will automatically download the corresponding iOS version and perform the installation again . During the process, as indicated above, all data stored in the device will be lost. That’s why we insist on the importance of backing up before we start, so we avoid possible data loss.

After a few minutes, the restore process will end, the device will reboot and show the initial setup menu as if it were a device just taken out of the box.

How to restore iPhone 7 directly from iOS

The second option to restore an iDevice is to do it directly from iOS. In this case it is not a complete reinstallation as with iTunes, but it will remove all our data, settings and apps ; But only that, it will do complete cleaning without actually reinstalling the OS.

To restore an iPod Touch, iPhone or iPad from the device itself we must take the following steps:

1.- Access the Settings app – GeneralReset .

2.- Touch the option to delete contents and settings .

3.- The device will ask for our security code (the same one we use to unlock it) and after entering it will ask us for a new confirmation that we really want to delete all our contents.

After a few minutes, the device will reboot and just like the restore option from iTunes, it will show the welcome menu so we can configure the device as if it were new.

As we said, after restoring the device we will show the initial configuration menu . In this menu we will have the possibility to configure the device as if it were completely new or to restore a previous backup and return to the configuration that we had when it was realized. The decision of how to continue is yours, it depends what you are looking for. Of course, if you have done the restore to check if a fault was caused by hardware or software, we recommend that you first activate the device as a new one, check if the fault is resolved (which would mean that it was caused by a problem Software) and after the backup is restored.

Now you know how to restore an iPhone, iPad or iPod Touch to factory status . Both procedures are completely valid, although as we said we like to do more from iTunes since it is more complete.

I forgot my iPhone password. What I do?

The memory usually plays us from time to time a trick. In the case of passwords, it will not be the first or last time you forget a password. Block your iPhone and not remember the 4 digits to unlock it hurts and much, but if you follow the following steps you can recover the smile soon:

If you have forgotten your password, it is easiest to restore your device and add a new one.

Restoring the iPhone will erase all content on the device (including the 4-digit code). The bad thing is that if before restoring do not synchronize your device with iTunes you will lose contacts, photos , music , etc.

Therefore, we strongly recommend synchronizing from time to time the iPhone with the computer, to have a backup of all your files on the computer.

Steps:

  1. In case of not remembering the password, first of all, is to synchronize your device to the computer through iTunes. Before you restore your system, make sure you have always synchronized.
  2. Once you have synchronized your iPhone with the computer, you are now going to have to put your iPhone into   recovery  mode  ( DFU) (Device Firmware Update). Putting your iPhone in this DFU mode means you can restore your device’s system using iTunes.

How to put iPhone in DFU mode? Press the “on” and “home” button at the same time for a few seconds (until the apple logo appears).

When you see the Apple logo, you have to stop pressing the “on” button but do not release the “home” button. Next you will see an image of a cable connecting to the iTunes icon with a text that says “Connect to iTunes”.

If you have not been clear, you can see this   that tells you visually how to do it.

3. Now that you officially have the iPhone in DFU mode  , a message will appear on the screen telling you that iTunes has detected the device in recovery mode and needs to be restored. Now, just click on the “Restore” button and wait a few minutes for iOS to download and install on your iPhone

When you restore the iPhone, you can choose to add a new password or not to use any password, and you can avoid having a bad time.

4. Now that you have it restored, the next step is to sync with iTunes again to retrieve the data you previously saved on your computer .

Important point that I want to remember before ending the article. When restoring the iPhone it is important that you follow these steps, in the order I indicated. Do not rely too much on other tutorials on the Internet. Some are wrong and can ruin your life and that of your iPhone.

Restore iPhone from iTunes

There are several reasons that can lead you to restore your iPhone device so that it returns to the state in which it arrives from the factory. Some of these reasons are:

  • You want to sell it or it will be used by another person and you do not want access to your personal data or to downloaded applications.
  • You do not remember your password , many times in this case the easiest is to restore the device and establish a new key.
  • You want to download an older version of iOS . Occasionally some users, after knowing the new features of iOS updates and thus satisfy their initial curiosity, have felt the need to return to an earlier version of the software after suffering some of the failures that occasionally cause these updates.

But before restoring your device you have to keep in mind that with this operation all the data,  photographs, videos, applications, etc … that are stored on the iPhone will be erased. For this reason it is advisable to make a backup before restoring the system before losing all this personal information.

To restore your device and save a backup you must follow the following instructions:

Turn off the ” Search for my iPhone ” feature. To do this, on your iPhone, tap Settings, then on iCloud, and finally turn off the activation lock.

Get Customized Solutions at CDW to Run a Software Management Plan.

Now connect your iPhone device to the computer via a USB cable and open the iTunes program , if it does not open automatically when you connect your iPhone to the computer.

Then select your device when it appears in iTunes, and click on the tab in which “restore” appears.

ITunes will ask if you want to save a backup or if you prefer not to. If you decide to make a backup all your data, photos and applications will be saved, but if you decide not to make a backup, all the information stored on your iPhone will be deleted.

Click “restore” again to confirm that you want to return the device to the factory settings and thus delete all data and contents stored on the device. ITunes will download the iOS software file and restore your device.

Once the restoration process is complete, the Welcome word will appear on your iPhone screen . By sliding the band at the bottom of the screen you can reconfigure your device.

By following these steps that simply show how to restore your iPhone, you will be able to safely perform this process and, through the backup, you will not have to regret any losses and you will be able to recover all the data that you stored on your iOS device before restoring it .

How to Reset iTunes, iCloud or App Store Password from iPhone – Reset itunes password

if you have forgotten the password for your iCloud or iTunes account, you can use your iPhone or iPad to reset it . However, the information you may need to reset it may vary depending on whether we have activated 2-step verification or not. But regardless of the method that we are using, we can follow a few steps to reset the password of iCloud, iTunes and App Store accounts.

How to reset your Apple ID password using your recovery email

  1. Open  Safari  on your iPhone or iPad and go to the following address:  iforgot.apple.com.
  2. Touch enter Apple ID.
  3. Enter your email address and tap  Next  in the upper right.
  4. Click  Reset By Mail.
  5. Check your recovery email and follow the instructions to reset the password.

How to reset the Apple ID password using security questions

  1. Open  Safari  on your iPhone or iPad and go to the following address:  iforgot.apple.com.
  2. Touch enter Apple ID.
  3. Enter your email address and tap  Next  in the upper right.
  4. Touch Security Question  (this is your only option, if you do not have a recovery email).
  5. Check the date of birth  in order to move on.
  6. Write the answers to the questions, then click  Next.
  7. Enter and confirm the new password.

How to reset your Apple ID password using 2-step verification

If you’ve turned on 2-step verification for your Apple ID, the process used to reset the password is different. We will need to have two things to do it:

  • The recovery key that Apple gave you when you enabled 2-step verification.
  • trusted device , like your iPhone or iPad.

Once we have made sure that we meet these two requirements, we only have to follow the following steps:

  1. Open  Safari  on your iPhone or iPad and go to the following address:  iforgot.apple.com.
  2. Touch enter Apple ID.
  3. Enter your email address and tap  Next  in the upper right.
  4. Enter your recovery  key  and click  Next.
  5. Select the  device  you want to verify with your identity and press  Next.
  6. Enter the  verification code  and click  Next.
  7. Enter  the new password  and click  Next.

What happens if I do not have my recovery key or password?

If you’ve turned on 2-step verification in your account but have forgotten your password and do not have your recovery key, even if you have a trusted device, there is no way to recover it. In this case, you will have no choice but to create a new Apple ID and start over.

As iMore points out , it is not very difficult to reset the password for our iTunes, iCloud or App Store account as long as we have the necessary data to do so. The options that Apple puts at our disposal are several, so we can not say that there are no ways to recover our “lost” password.

Have you had to use some of these methods to recover your password? Have you had a problem? If you have any questions, please let us know and we will be happy to help.

Reset iCloud password, Change iCloud Password

The iCloud password protects the privacy of the information stored in iCloud (for example, your email). Your password also protects your ability to locate your device or delete your content remotely using  . It is advisable to periodically change your iCloud password to protect your information.

Important: If you use the same  for iCloud as for other Apple services, such as the Apple Online Store, iTunes Store or Mac App Store, or to purchase products in iPhoto or Aperture, changing the iCloud password will also change the These services. Be sure to connect to those services using the new password.

Change iCloud password (Apple ID)

  1. Go to the My Apple ID website ( appleid.apple.com ) and follow the instructions to reset your Apple ID password. For more information, see the Apple Technical Support article  .

  2. After changing the iCloud password, make sure you update it on all your devices, as well as the email applications you use to receive iCloud mail.

    • On your iPhone, iPad, or iPod touch: Go to Settings> iCloud and tap your iCloud account.

    • On a Mac: Open iCloud Preferences .

    • On a Windows computer: Open the iCloud Control Panel .

    • In your email apps: See the help provided for the email apps you use.

If you set up iCloud on your iPhone, iPad, or iPod touch, be sure to set up a code lock on your device (Settings> General> Code Lock) for added security.

How to retrieve it from our iOS device.

If it happens in front of our mobile device we have several options, but perhaps the fastest is the one that appears after several failed attempts, “iForgot” . After clicking on this icon we are redirected directly to the “My Apple Id” page . Once at this point, we offer two options to recover it:

  • The first is to reset the password through our email , the one that we associate Apple. If we decide this option, we will automatically send an email with a link where we can enter the new password.
  • The second, to answer those questions of security that we did the day we created the account or at some other time. If we respond correctly automatically we will get a window where we can enter a new password, with the features I told you above.

One more option we have from our iOS devices is to retrieve it directly from the Settings, so we must navigate through the menu until we find the section called “iTunes Store and App Store”, once we click on our “Apple ID” and once Done we will see the already commented option “iForgot” and we only have to follow the steps mentioned above.

How to retrieve it from our browser.

If we do not remember our password and want to retrieve it directly from any browser we must search Google, “My Apple ID”. Once clicked the correct link will appear a web where we can do several things, the option that interests us (reset our password) or manage any of the points of our ID. Select the option, “Reset your password . Then you will ask us to enter our email associated with the ID.

Once done we will see the same two options that we have described a little above, reset the password by answering the security questions, or do it through our email.

If once put to remember our password we realize that we also remembered the email that we associated with our ID, then the problem is somewhat greater, but has a solution. For this more specific case, we must enter the “My Apple ID” page again and enter the “Find your Apple ID” option in the lower right corner.

Once inside we are shown a series of fields to fill where Apple asks us to provide all the information possible so that they can locate our ID and later, help us to recover our password. Among the information you ask us to provide you are our First Name, Last Name, current email address and any other address that we have and that may in our day associate with our Apple ID. If in spite of providing all our data Apple is not able to find our ID, then as a last resort the only possible option is to create a new Apple ID.

This solution is also valid for people who, unconsciously or not, have more than one Apple ID created. When we create an account for some of Apple’s services, such as iTunes or the App Store, we are creating an Apple ID. Contrary to what we may think, it is not necessary to create a new account for each of the different services, just use the first ID we created for all other stores related to Apple.

How to recover it from our computer.

If we do not remember our password and we are in front of our brand new MacBook, iMac, Mac Mini or some other, we must follow the following steps.

One of the fastest and easiest to do is go directly to our browser and search Google, “My Apple ID” . Once clicked the correct link will appear a web where we can do several things, the option that interests us (recover our password) or manage any of the points of our ID. We select the option, “I do not remember my password?” . When you select it, you will ask us to enter our email associated with the ID and once done we will see the same two options we have described a little above, reset the password by answering the security questions, or do it through our email.

If the above option convinces you, you can manage your ID always from stores, App Store or iTunes Store . You can do it directly from the side panel or in the “menu bar” from the “iTunes Store” option . Once inside we must follow the same old steps.

How to Reset iPhone and iPad: HOW TO FACTORY RESET AN IPHONE USING ITUNES

TAGS: how do i reset my ipad to factory settings without the passcode, how to reset ipad to factory settings without password, reset ipad to factory settings without computer, reset ipad to factory settings without icloud password, how to reset ipad to factory settings forgot password, how to reset ipad without password

Tagged: , , , , , , ,

This topic contains 9 replies, has 1 voice, and was last updated by   .

  • Author

    Posts

  • Sep 3, 2017 at 12:48 pm

    Keymaster

    your device from an

    1. Turn on your device.
    2. If you already your device, you need to  before you can use these steps to from your backup.
    3. Follow the onscreen setup steps, then tap from iCloud Backup.
    4. Sign in to 
    5. Choose a backup.(If you don’t see onscreen steps to help you update, ).
    6. When asked, sign in to your account,
    7. Stay connected and wait for it. It might need a few minutes to an hour to complete.
    8. It’s done

    TAGS: how to reset iphone with itunes without passcode, how to reset locked iphone with itunes, how do i restore my iphone to factory settings, how to restore iphone 4s without itunes, restore ipad to factory settings, iphone restore software without itunes, how to restore ipad without itunes, how to reinstall ios on iphone without itunes

  • Sep 3, 2017 at 12:50 pm

    Keymaster

    To  your iPhone or  go to Settings > General > Reset and then select . After typing in your if set one, you’ll get a warning box appear, with the option to Erase iPhone (or iPad) in red. Tap this.

  • Sep 3, 2017 at 12:56 pm

    Keymaster

  • Sep 3, 2017 at 1:09 pm

    Keymaster

    Putting your iPhone or iPad in Recovery Mode

    1) Launch on the   to complete the process on.

    2) Connect your iOS device  to the computer you are using for the restore.

    3) Force-restart your iPhone by pressing and holding the  and power button until you see an on the screen. When you see the logo, keep holding buttons; don’t let go.

    4) After a little while longer, your should show a ‘Connect to iTunes’ screen like this one. At this time, you can let go of the buttons.

    Congratulations, you’re now in Recovery Mode!  Now you should follow the instructions here:

  • Sep 3, 2017 at 1:18 pm

    Keymaster

    How to put your iPhone 7 into recovery mode

    1. 7 if it isn’t off already.
    2. Press and hold down the On/Off button  for 3 seconds.
    3. Swipe the slide to  confirmation slider to the right.
    4. Press and hold down the volume down button on your iPhone 7.
    5. Plug your iPhone 7 into your  or  and make sure  is running.
    6. Release the volume down button when you see the Connect to  screen.

    How to put your iPhone or iPad into recovery mode

    1. , , or . Press and hold down the On/Off button  for 3 seconds.
    2. Press and hold down the  on your , , or .
    3. Plug your , iPod touch, or into your Mac or Windows PC and make sure is running.
    4. Release the when you see the Connect to screen.

    At this point, should display an alert saying it’s detected an , iPod touch, or in recovery mode, and will let you .

  • Sep 3, 2017 at 1:29 pm

    Keymaster

    1. – Turning off

    It’s best to turn it off if you have an older-generation iPad.

    Find My iPad uses , which basically prevents thieves from turning it off or .

    To switch it off go to Settings, then iCloud and tap Find My iPad to switch it off.
    (Settings | iCloud | Find My iPad).

    2. How to reset your iPad – Unpairing your Apple Watch

    Make sure you’ve your from your iPad.

    Open the Apple Watch App on your iPad, tap My Watch Tab, tap your Watch at the top of the screen, tap and tap again to confirm.

     

    You may have  to enter your Apple ID and password . a backup will be automatically created by iPad or iPhone  of your watch before erasing the content.

    3. – Creating a

    You’ll need to make sure you have a backup of your device. You can follow Apple’s guide to backing up your iPad .

    4. How to reset your iPad – signing out of iCloud

    Depending on the you run on your iPad, you’ll either have to sign out or delete your account from your iPad.

    Unlike with iOS 10, there’s no need to sign out first.

    5. How to reset your iPad – resetting it

    Now you’ve backed up your device and signed out of iCloud, it’s time to reset the iPad. To do this:

    1.Go back to Settings | General | | Erase All Content and Settings.

    2. If prompted, enter the device’s .

    3. Tap – this will erase all the content on the iPad.

    Your device is now completely reset and ready to be sold.  Now you are

  • Sep 3, 2017 at 1:43 pm

    Keymaster

    Plug your old device into iTunes and it, make sure that it does a full before you unplug it again.

    Once the process is complete, you can begin setting up your new device.

    At the end of on the device itself, you’ll be given the option to .

    Simply tap this button, then connect your new iPad to your computer to it.

    If you accidentally tapped ‘’ instead, then all you need to do is connect your device to your computer, right-click on its name under the ‘Devices’ tab within , then click ‘…’, .

    If you , then the process is even easier. When you get to the end of the initial set up on your device itself, you’ll be presented with the option to ‘Restore from iCloud Backup’. Tap this button and select your backup, then allow your device to do its thing.

  • Sep 3, 2017 at 1:54 pm

    Keymaster

    1. Restore to Factory Settings Without iTunes

    It is just as simple to restore your without iTunes. Go to Settings > General >  and tap on .

    [caption id="attachment_21187" align="aligncenter" width="500"]How To Restore iPad Mini To Factory Settings How To Restore iPad Mini To Factory Settings[/caption]

     

    You’ll then be asked to enter id or ; after the confirmation, your iPad Mini will and the together with a loading bar will appear on screen.

    Upon the start up, all content, apps, music, photos, and personal account information will be erased from the iPad Mini.

    2.

    Connect your iPad Mini to your desktop computer. Start . Locate your iPad Mini under ‘Devices’ on the left panel and .

    If this is your first time restoring, you’ll have to wait for the firmware file to be downloaded. Once it is downloaded, it’ll ask if you really want to restore. Confirm to proceed.

    Once your iPad Mini starts up again, you’ll have a clean iPad Mini with the latest firmware installed.

  • Sep 3, 2017 at 1:57 pm

    Keymaster

    Find out using .

    1. With the device power off, press and hold the Home button.
    2. While holding the Home key, connect the USB cable to the device. Wait until the Apple logo appears and keep holding the Home button for few more seconds.
    3. Continue holding the Home button until the iTunes logo appears.
    4. If prompted with “The software on “iPad” needs to be restored to factory settings or updated”, click Restore.
    5. In iTunes, click Restore and Update, then follow the steps on screen.

    The device has been restored using .

    TAGS: how to reset iphone with itunes without passcode, how to reset locked iphone with itunes, how do i restore my iphone to factory settings, how to restore iphone 4s without itunes, restore ipad to factory settings, iphone restore software without itunes, how to restore ipad without itunes, how to reinstall ios on iphone without itunes

  • Sep 3, 2017 at 2:57 pm

    Keymaster

    How to restore iPad from iTunes Backup

    1. Connect iPad into your Mac or PC (launch iTunes )
    2. Click on the iPad icon in the top left area of iTunes
    3. Click Restore Backup… (you may need to turn off Find My iPad before proceeding)
    4. Select the particular backup you would like to restore to your iPad from the drop down list
    5. Click Restore

    Once you plug in your iPad and have iTunes open, click on the iPad icon in the upper left area of the iTunes window if the iPad Summary page doesn’t appear automatically.

    Click Restore Backup…

    [caption id="attachment_21193" align="aligncenter" width="620"]How to restore iPad 4 from iTunes Backup How to restore iPad 4 from iTunes Backup[/caption]

    You’ll see timestamps below the Restore Backup option the last time that iTunes and iCloud Backups were completed.

    You may need to turn off Find My iPad before continuing. On your iPad navigate to Settings → Tap on your name at the top → iCloud → Find My iPad.

    [caption id="attachment_21191" align="aligncenter" width="1560"]How to restore iPad 4 from iTunes Backup How to restore iPad 4 from iTunes Backup[/caption]

    Make sure to select the exact backup you’d like to restore from as you may have multiple backups and/or devices to choose from.

     

    When the restore process is complete, eject your iPad by clicking the eject icon in the top left area of iTunes.How to restore iPad 4 from iTunes Backup

     

    And that’s how to restore an iPad from an iTunes Backup.

  • Author

    Posts

This topic contains 0 replies, has 1 voice, and was last updated by   .

  • Author

    Posts

  • Sep 30, 2016 at 6:04 pm

    Keymaster

    How to factory reset an iPhone using the smartphone Erase and restore iPhone without a computer

    Learn how to remove all settings, data, and information, and how to restore your device to factory settings. If you don’t remember your Restrictions passcode or can’t access the Restrictions settings for your iPhone, iPad, or iPod touch, . How to factory reset an iPhone using the smartphone Erase and restore iPhone without a computer.

    OniPhone

    1. On your iPhone, iPad, or iPod touch,
    2. go to Settings > General > Reset.
    3. Then tap Erase All Content and Settings.

    On Apple Watch

    1. On your Apple Watch,
    2. go to Settings > General > Reset.
    3. Then tap Erase All Content and Settings.
    • Before you erase your iPhone, iPad, or iPod touch with iOS 10, make sure that you sign out of iCloud. Go to Settings > iCloud > Sign Out. Otherwise, your device might remain in Activation Lock. Learn what to do if you erased your device and need to .

    How to factory reset an iPhone using the smartphone Erase and restore iPhone without a computer.

    How to Reset iPhone and iPad: HOW TO FACTORY RESET AN IPHONE USING ITUNES

    How to factory reset an iPhone using the smartphone Erase and restore iPhone without a computer.

  • Author

    Posts

This topic contains 0 replies, has 1 voice, and was last updated by   .

  • Author

    Posts

  • Sep 30, 2016 at 5:57 pm

    Keymaster

     

    HOW TO FACTORY RESET AN IPHONE USING ITUNES

    1. Open iTunes on your Mac or PC.
    2. If you can’t access a computer and your device still works, 
    3. Connect your iPhone, iPad, or iPod to your computer with the cable that came with your device.
    4. If a message asks for your device passcode or to Trust This Computer, follow the onscreen steps. If you forgot your passcode, .
    5. elect your iPhone, iPad, or iPod when it appears in iTunes.
    6. In the Summary panel, click Restore [device].
    7. Click Restore again to confirm.
    8. Then iTunes erases your device and installs the latest iOS or iPod software.
    9. After your device restores to factory settings, it restarts.
    10. Now you can set it up as new.

    HOW TO FACTORY RESET AN IPHONE USING ITUNES

    How to Reset iPhone and iPad: HOW TO FACTORY RESET AN IPHONE USING ITUNES

  • Author

    Posts

This topic contains 0 replies, has 1 voice, and was last updated by   .

  • Author

    Posts

  • Sep 30, 2016 at 5:51 pm

    Keymaster

    How to factory reset your iPhone or iPad

    How to factory reset your iPhone or iPad

    1. Go to Settings >
    2. General > Reset > Erase all Content and Settings.
    3. An Erase iPhone/iPad warning box will now pop up.
    4. Click Erase and enter the device’s passcode and Apple ID info when prompted.
    5. The device will then reset and, when completed,
    6. you’ll be presented with an iPhone/iPad as if it were straight out of the box.

    How to reset iPad to factory settings

    1. It is just as simple to restore your iPad Mini without iTunes.
    2. Go to Settings > General > Reset and
    3. tap on Erase All Content and Settings.
    4. You’ll then be asked if you want to continue; after the confirmation,
    5. your iPhone or iPad Mini will reset and the Apple logo together with a loading bar will appear on screen.

    How to Reset iPhone and iPad

  • Author

    Posts

This topic contains 0 replies, has 1 voice, and was last updated by  Yasin .

  • Author

    Posts

  • Oct 24, 2015 at 11:02 am


    Yasin


    if you have not synced your device to your iTunes and iCloud accounts, or your computer is asking for your device’s passcode. Then only use this method.
    If you are full of bad luck and haven’t synced your iOS device to your iTunes and iCloud accounts, resetting your iOS device passcode or password using this method will erase or delete or wipe all of the data off of your iPhone, iPad and iPod touch. This feature is implemented by Apple in order to prevent an unauthorized user from accessing your data. How to Reset iPhone and iPad forgot password without using iTunes.

  • Author

    Posts

› › If I forget my passcode, how can I reset my iPad to delete content

This topic contains 2 replies, has 2 voices, and was last updated by  mohammed shaikh .

  • Author

    Posts

  • Oct 24, 2015 at 10:28 am

    Keymaster

  • Oct 24, 2015 at 10:29 am

    Keymaster

  • Oct 24, 2015 at 10:32 am


    mohammed shaikh

    Note, this will only work on the computer it last synced with
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.

  • Author

    Posts

This topic contains 10 replies, has 1 voice, and was last updated by  mohammed shaikh .

  • Author

    Posts

  • Oct 24, 2015 at 7:00 am


    Rajeev malhotra

    If you forgot the passcode for your iPhone, iPad, or iPod touch, or your device is disabled
    Follow these steps if you’ve forgotten your passcode, or if a message says that your device is disabled.
    Put the iPad into Recovery Mode and then try the Restore again:

    If that still doesn’t work, as a last resort try DFU mode:

  • Oct 24, 2015 at 7:01 am


    Rajeev bhatia

    Thank you for the link on how to get into Recovery Mode. That was the missing part of the puzzle. It looks like it’s doing the restore.

  • Oct 24, 2015 at 7:02 am


    Rajeev bhatia

    If you’ve synced with iTunes, .
    If you’re signed in to iCloud and Find My iPhone is enabled, .
    If you don’t use iCloud and you can’t sync or connect with iTunes, .

  • Oct 24, 2015 at 7:04 am


    Rajeev bhatia

    Restore using iTunesiPad factory reset without password - How to reset ipad without password
    If you’ve synced your device with iTunes, you can restore your device.
    Connect your device to the computer you synced with.
    Open iTunes. If asked for a passcode, try another computer you’ve synced with, or use .
    Wait for iTunes to sync your device and make a backup. If it doesn’t, learn what to do.
    Once the sync and backup have finished,click .

    When you reach the Set Up screen while restoring your iOS device, tap Restore from iTunes backup.
    Select your device in iTunes. Look at the date and size of each backup and pick the most relevant one.

  • Oct 24, 2015 at 7:06 am


    clare ryan

    Erase using Find my iPhone
    If you set up Find My iPhone on your iOS device or Mac, you can use iCloud to erase and restore it.
    From another device, go to icloud.com/find.
    If prompted, sign in with your Apple ID.
    Click All Devices at the top of your browser window.
    Select the device you want to erase.
    Click Erase [device] to erase your device and its passcode.
    Now you can either restore from a backup or set up as new.
    If your device isn’t connected to a Wi-Fi or cellular network, you can’t erase it with Find My iPhone.

  • Oct 24, 2015 at 7:10 am


    clare ryan

    Restore using recovery mode
    If you’ve never synced with iTunes or set up Find My iPhone in iCloud, you’ll need to use recovery mode to restore your device. This will erase the device and its passcode.
    Connect your iOS device to your computer and open iTunes. If you don’t have a computer, borrow one from a friend, or go to an Apple Retail Store or Apple Authorized Service Provider.
    While your device is connected, force restart it: Press and hold the Sleep/Wake and Home buttons at the same time. Don’t let go when you see the Apple logo — keep holding until you see the recovery mode screen.

    When you see the option to Restore or Update, choose Restore.

    iTunes will download software for your device. If it takes more than 15 minutes, your device will exit recovery mode and you’ll need to repeat steps 2 and 3.

    Wait for the process to finish. Then you can and use your device.

  • Oct 24, 2015 at 9:10 am


    clare ryan

  • Oct 24, 2015 at 10:36 am


    ameen tar

    Note, this will only work on the computer it last synced with. Here’s how:

    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.

  • Oct 24, 2015 at 10:54 am


    mohammed shaikh

    By using iOS Recovery mode erase the device and its passcode to unlock iPhone, iPad and iPod Touch.
    Firstly, Turn off or switch off your iOS device.
    Swipe it until it turns off.
    In the third step Connect your apple usb cable to your Desktop Pc but don’t connect your device yet.
    Start or open iTunes on your Computer.
    Keep Pressing and hold your iOS device Home button and plug the iOS device into your computer.
    Connecting the device will cause it to turn on, but continue to hold the Home button.
    If your iOS device doesn’t turn on automatically, turn it on, but continue to hold the home button.
    After Continue holding the Home button a message will appear in iTunes telling you that a device in Recovery Mode has been detected.
    Restore your iOS device By using iOS Recovery mode.

  • Oct 24, 2015 at 10:55 am


    mohammed shaikh

    How to Reset iPhone and iPad forgot password without using iTunes.

    Go to your iPhone Settings then > iCloud.
    Scroll down and Tap on ‘Find my iPhone’.
    Toggle on ‘Find my iPhone and Send last location features.’
    After that Go to > iCloud.
    Sign In with your Apple ID and password to access iCloud.
    Select and Click All Devices at the top of your browser window and select on iPhone device you want to reset your passcode.
    After selecting the device it will show you three options play sound, lost mode, Erase iPhone.
    Click erase device to erase or reset its password or passcode.
    Now you can use your iOS device again.

  • Oct 24, 2015 at 10:59 am


    mohammed shaikh

  • Author

    Posts

Contents




ШОКИРУЮЩИЕ НОВОСТИ